OCR · A-Level · Chemistry

    Course version: H432 · Version from Sept 2017

    (i) anions: CO₃²⁻, Cl⁻, Br⁻, I⁻, SO₄²⁻ (see 3.1.4 a)

    Full specification wording

    Transition elements - 5.3.2 Qualitative analysis: (i) anions: CO₃²⁻, Cl⁻, Br⁻, I⁻, SO₄²⁻ (see 3.1.4 a)

    This row lists the anions whose qualitative tests you must know: carbonate (CO₃²⁻), chloride (Cl⁻), bromide (Br⁻), iodide (I⁻) and sulfate (SO₄²⁻).

    • Point 2 of 3
    • 4 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    This row lists the anions whose qualitative tests you must know: carbonate (CO₃²⁻), chloride (Cl⁻), bromide (Br⁻), iodide (I⁻) and sulfate (SO₄²⁻). Learn each test by reagent, observation and ionic equation. Carbonate reacts with dilute acid to release carbon dioxide, which turns limewater milky. Chloride, bromide and iodide are identified by adding dilute nitric acid then silver nitrate: chloride gives a white precipitate, bromide a cream precipitate and iodide a pale yellow precipitate. Sulfate is identified by adding dilute hydrochloric acid then barium chloride solution, giving a white precipitate of barium sulfate. Write charges with superscript signs, for example CO₃²⁻ and SO₄²⁻, and balance each ionic equation.

    What earns the marks

    • Identifies carbonate by the effervescence of carbon dioxide when dilute acid is added, confirmed by limewater turning milky.
    • States that silver nitrate with dilute nitric acid gives a white precipitate for chloride, a cream precipitate for bromide and a pale yellow precipitate for iodide.
    • Describes the sulfate test as adding dilute hydrochloric acid then barium chloride solution to form a white precipitate of barium sulfate.
    • Writes balanced ionic equations for the precipitation reactions, for example Ag⁺(aq) + Cl⁻(aq) → AgCl(s).
    • Uses correct superscript charges such as CO₃²⁻, SO₄²⁻ and Cl⁻ throughout.

    Common mistakes and how to put them right

    • Omits the dilute nitric acid before silver nitrate.

      Put it right: Add it to remove carbonate ions that would also give a precipitate.

    • Confuses the silver halide colours.

      Put it right: Keep white for chloride, cream for bromide and pale yellow for iodide.

    • Uses barium nitrate without acid or forgets the acid.

      Put it right: Add dilute hydrochloric acid first so carbonate does not interfere.

    • Writes charges as postfix numbers.

      Put it right: Use superscript signs such as SO₄²⁻ and Cl⁻.

    Exam tips

    • Learn each anion as a reagent–observation–equation triple so any part can be asked.
    • Quote precipitate colours precisely, since vague colour words lose credit.
    • Practise writing the three silver halide equations and the barium sulfate equation until they balance.

    Try the lesson

    The start of the Transition elements - 5.3.2 Qualitative analysis: (i) anions: CO₃²⁻, Cl⁻, Br⁻, I⁻, SO₄²⁻ (see 3.1.4 a) lesson, made from teaching notes for this specification point.

    Listen

    This row lists the anions whose qualitative tests you must know: carbonate (CO₃²⁻), chloride (Cl⁻), bromide (Br⁻), iodide (I⁻) and sulfate (SO₄²⁻). Learn each test by reagent, observation and ionic equation. Carbonate reacts with dilute acid to release carbon dioxide, which turns limewater milky. Chloride, bromide and iodide are identified by adding dilute nitric acid then silver nitrate: chloride gives a white precipitate, bromide a cream precipitate and iodide a pale yellow precipitate. Sulfate is identified by adding dilute hydrochloric acid then barium chloride solution, giving a white precipitate of barium sulfate. Write charges with superscript signs, for example CO₃²⁻ and SO₄²⁻, and balance each ionic equation. A strong answer earns marks for these points. Identifies carbonate by the effervescence of carbon dioxide when dilute acid is added, confirmed by limewater turning milky. States that silver nitrate with dilute nitric acid gives a white precipitate for chloride, a cream precipitate for bromide and a pale yellow precipitate for iodide. Describes the sulfate test as adding dilute hydrochloric acid then barium chloride solution to form a white precipitate of barium sulfate. Writes balanced ionic equations for the precipitation reactions, for example Ag⁺(aq) + Cl⁻(aq) → AgCl(s). Exam tip: Learn each anion as a reagent–observation–equation triple so any part can be asked.

    See it

    A top-down flowchart. A single node labelled 'Anion to identify' branches into five anion nodes: CO₃²⁻, Cl⁻, Br⁻, I⁻ and SO₄²⁻. Each anion node leads to one observation node. CO₃²⁻ leads to 'Add dilute acid: carbon dioxide released, limewater turns milky'. Cl⁻ leads to 'Dilute nitric acid then silver nitrate: white precipitate'. Br⁻ leads to 'Dilute nitric acid then silver nitrate: cream precipitate'. I⁻ leads to 'Dilute nitric acid then silver nitrate: pale yellow precipitate'. SO₄²⁻ leads to 'Dilute hydrochloric acid then barium chloride: white precipitate of barium sulfate'.
    It shows each listed anion and the reagent and observation used to identify it.

    Key words

    Say what each word means before you turn the card.

    Qualitative anion tests

    Try answering aloud or in your head before turning the card.

    Silver halide precipitates

    Try answering aloud or in your head before turning the card.

    Barium sulfate precipitation

    Try answering aloud or in your head before turning the card.

    Ionic equations and charge notation

    Try answering aloud or in your head before turning the card.

    See every definition
    Qualitative anion tests
    Tests for the anions carbonate, chloride, bromide, iodide and sulfate, learned by reagent, observation and ionic equation.
    Silver halide precipitates
    Adding dilute nitric acid then silver nitrate gives a white precipitate for chloride, a cream precipitate for bromide and a pale yellow precipitate for iodide.
    Barium sulfate precipitation
    Adding dilute hydrochloric acid then barium chloride solution identifies sulfate, giving a white precipitate of barium sulfate.
    Ionic equations and charge notation
    Balanced ionic equations are written for the precipitation reactions, with charges shown as superscript signs such as CO₃²⁻, SO₄²⁻ and Cl⁻.

    Label the diagram

    Some boxes have lost their names. Pick the right name for each number.

    The diagram again, with 3 boxes numbered instead of named. A top-down flowchart. A single node labelled 'Anion to identify' branches into five anion nodes: CO₃²⁻, Cl⁻, Br⁻, I⁻ and SO₄²⁻. Each anion node leads to one observation node. CO₃²⁻ leads to 'Add dilute acid: carbon dioxide released, limewater turns milky'. Cl⁻ leads to 'Dilute nitric acid then silver nitrate: white precipitate'. Br⁻ leads to 'Dilute nitric acid then silver nitrate: cream precipitate'. I⁻ leads to 'Dilute nitric acid then silver nitrate: pale yellow precipitate'. SO₄²⁻ leads to 'Dilute hydrochloric acid then barium chloride: white precipitate of barium sulfate'.
    • 1Box 1

    • 2Box 2

    • 3Box 3

    0 of 3 labelled

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Transition elements - 5.3.2 Qualitative analysis: (i) anions: CO₃²⁻, Cl⁻, Br⁻, I⁻, SO₄²⁻ (see 3.1.4 a)

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge