OCR · A-Level · Chemistry
Course version: H432 · Version from Sept 2017
(i) use of thin layer or paper chromatography
Full specification wording
Use of apparatus and techniques: (i) use of thin layer or paper chromatography
Chromatography separates components by their different affinities for a stationary phase and a mobile phase.
- Point 13 of 17
- 3 key terms
Study notes
From the teaching notes for this specification point.
The idea
Chromatography separates components by their different affinities for a stationary phase and a mobile phase. In paper chromatography the stationary phase is water held on the paper; in thin layer chromatography (TLC) it is a thin layer of silica or alumina on a plate. The mobile phase is a solvent that travels up the stationary phase by capillary action. A small spot of mixture is applied near the baseline, the solvent is allowed to rise, and each component travels a distance depending on its balance between the two phases. The retention factor Rf = distance travelled by component ÷ distance travelled by solvent front, and it is compared with known values to identify components.
What earns the marks
- Identifies the stationary phase and the mobile phase for paper or thin layer chromatography.
- Explains that components separate because they have different affinities for the stationary and mobile phases.
- Describes applying a small spot on the baseline and allowing the solvent front to rise without the spot dipping into the solvent.
- Calculates Rf as the distance travelled by the component divided by the distance travelled by the solvent front and uses it to identify a component.
Common mistakes and how to put them right
Places the spot below the solvent level.
Put it right: Keep the baseline above the solvent so the sample does not dissolve into the reservoir.
Uses a large spot.
Put it right: Apply a small concentrated spot so the separated components give distinct spots.
Measures Rf to the top of the plate rather than the solvent front.
Put it right: Measure both distances from the baseline to the solvent front.
Exam tips
- Name the stationary and mobile phases explicitly for the technique chosen.
- Show the Rf calculation with both measured distances from the baseline.
- Explain separation in terms of relative affinity rather than simply saying components move at different speeds.
Try the lesson
The start of the Use of apparatus and techniques: (i) use of thin layer or paper chromatography lesson, made from teaching notes for this specification point.
Listen
Chromatography separates components by their different affinities for a stationary phase and a mobile phase. In paper chromatography the stationary phase is water held on the paper; in thin layer chromatography (TLC) it is a thin layer of silica or alumina on a plate. The mobile phase is a solvent that travels up the stationary phase by capillary action. A small spot of mixture is applied near the baseline, the solvent is allowed to rise, and each component travels a distance depending on its balance between the two phases. The retention factor Rf = distance travelled by component ÷ distance travelled by solvent front, and it is compared with known values to identify components. A strong answer earns marks for these points. Identifies the stationary phase and the mobile phase for paper or thin layer chromatography. Explains that components separate because they have different affinities for the stationary and mobile phases. Describes applying a small spot on the baseline and allowing the solvent front to rise without the spot dipping into the solvent. Calculates Rf as the distance travelled by the component divided by the distance travelled by the solvent front and uses it to identify a component. Exam tip: Name the stationary and mobile phases explicitly for the technique chosen.
Key words
Say what each word means before you turn the card.
Separation by differing affinity
Try answering aloud or in your head before turning the card.
Rf calculation and identification
Try answering aloud or in your head before turning the card.
Practical technique for paper and thin layer chromatography
Try answering aloud or in your head before turning the card.
See every definition
- Separation by differing affinity
- Each component travels a distance depending on its balance between the two phases, so components separate because they have different affinities for the stationary and mobile phases.
- Rf calculation and identification
- The retention factor is the distance travelled by the component divided by the distance travelled by the solvent front, and it is compared with known values to identify components.
- Practical technique for paper and thin layer chromatography
- A small spot of mixture is applied near the baseline, the solvent is allowed to rise, and the spot must not dip into the solvent.
There is more to this lesson
The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge
Test your understanding of Use of apparatus and techniques: (i) use of thin layer or paper chromatography
Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge