OCR · A-Level · Psychology

    Course version: H567 · Version from Sept 2015

    Use statistical tables to determine significance (to include: using an…

    Full specification wording

    D.1 – handling data: Use statistical tables to determine significance (to include: using an extract from statistical tables to say whether or not a given observed value is significant at the 0.05 level of significance for a one-tailed test)

    A critical value is the figure a calculated result must beat to be considered significant.

    • Point 14 of 17
    • 3 key terms

    Study notes

    From the teaching notes for this specification point.

    The idea

    A critical value is the figure a calculated result must beat to be considered significant. You use statistical tables to determine significance by entering with specific information: the level of significance (e.g. the 0.05 level of significance), whether the hypothesis is for a one-tailed test or two-tailed test, and the sample size (N). Chi-square uses degrees of freedom (df). Compare the critical value with your observed value. For Wilcoxon, Mann-Whitney and the Sign test, the observed value must be $\le$ the critical value; for Chi-square and Spearman's rho, it must be $\ge$. For example, using an extract from statistical tables, if a given observed value for a Wilcoxon test is 4 (N=8), the critical value at the 0.05 level for a one-tailed test is 5. Since $4 \le 5$, the result is significant.

    What earns the marks

    • Identifying the information used to enter the extract from statistical tables: the significance level, the number of tails (if applicable), and the sample size or degrees of freedom.
    • Stating the correct direction of the comparison for the named test and quoting both figures, the calculated (observed) value and the critical value, alongside each other.
    • Writing the conclusion to say whether or not a given observed value is significant at the 0.05 level of significance for a one-tailed test, explicitly stating which hypothesis is rejected or retained.
    • Explaining what the 0.05 level means, that there is a 5% probability of a result at least as extreme arising by chance if the null hypothesis were true.

    Common mistakes and how to put them right

    • Reading the two-tailed column when the hypothesis was directional (one-tailed test), which applies a stricter critical value and can throw away a genuinely significant result.

    • Reversing the comparison, so a Mann-Whitney observed value far above the critical value is incorrectly announced as a significant difference.

    • Forgetting to use the absolute value for Spearman's rho, incorrectly concluding a negative observed rho is not equal to or higher than the critical value.

    Exam tips

    • The paper often prints an extract from statistical tables, so explicitly state the critical value you have identified from the correct row and column before making your comparison.
    • Give the decision as a full sentence, ensuring you explicitly state whether the result is significant and whether the null hypothesis is accepted or rejected.

    Try the lesson

    The start of the D.1 – handling data: Use statistical tables to determine significance (to include: using an extract from statistical tables to say whether or not a given observed value is significant at the 0.05 level of significance for a one-tailed test) lesson, made from teaching notes for this specification point.

    Have a go first

    An extract from a statistical table for the Sign test shows critical values for a one-tailed test at the 0.05 level of significance: N=8 is 1, N=9 is 1, N=10 is 1, N=11 is 2. A researcher conducts a one-tailed Sign test with 10 participants and calculates an observed value of 2. For the Sign test, the observed value must be equal to or less than the critical value to be significant. What is the correct conclusion?

    Listen

    A critical value is the figure a calculated result must beat to be considered significant. You use statistical tables to determine significance by entering with specific information: the level of significance (e.g. the 0.05 level of significance), whether the hypothesis is for a one-tailed test or two-tailed test, and the sample size (N). Chi-square uses degrees of freedom (df). Compare the critical value with your observed value. For Wilcoxon, Mann-Whitney and the Sign test, the observed value must be \le the critical value; for Chi-square and Spearman's rho, it must be \ge. For example, using an extract from statistical tables, if a given observed value for a Wilcoxon test is 4 (N=8), the critical value at the 0.05 level for a one-tailed test is 5. Since 4 \le 5, the result is significant. A strong answer earns marks for these points. Identifying the information used to enter the extract from statistical tables: the significance level, the number of tails (if applicable), and the sample size or degrees of freedom. Stating the correct direction of the comparison for the named test and quoting both figures, the calculated (observed) value and the critical value, alongside each other. Writing the conclusion to say whether or not a given observed value is significant at the 0.05 level of significance for a one-tailed test, explicitly stating which hypothesis is rejected or retained. Explaining what the 0.05 level means, that there is a 5% probability of a result at least as extreme arising by chance if the null hypothesis were true. Exam tip: The paper often prints an extract from statistical tables, so explicitly state the critical value you have identified from the correct row and column before making your comparison.

    Key words

    Say what each word means before you turn the card.

    critical value

    Try answering aloud or in your head before turning the card.

    levels of significance

    Try answering aloud or in your head before turning the card.

    one-tailed and two-tailed tests

    Try answering aloud or in your head before turning the card.

    See every definition
    critical value
    The figure a calculated result must beat to be considered significant, found by entering statistical tables with specific information.
    levels of significance
    The 0.05 level means there is a 5% probability of a result at least as extreme arising by chance if the null hypothesis were true.
    one-tailed and two-tailed tests
    Whether the hypothesis is for a one-tailed test or two-tailed test is information used to enter the extract from statistical tables.

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of D.1 – handling data: Use statistical tables to determine significance (to include: using an extract from statistical tables to say whether or not a given observed value is significant at the 0.05 level of significance for a one-tailed test)

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge