Skip to topic
    ← Back to course topics

    Systems approach to designing - Processes — AQA GCSE Design and Technology

    Systems approach to designing - Processes explained

    A microcontroller is a small programmable chip that runs a stored set of instructions and connects to inputs and outputs.

    Read the full explanation

    Programming it gives a product behaviour that fixed wiring cannot easily provide. As a counter, the program increments a stored value each time an input event occurs, such as a person passing a sensor, so a product can tally items or limit how many operations happen. As a timer, the program measures or controls elapsed time, for example switching a lamp off after a set delay or pulsing an output at regular intervals. For decision making, the program tests conditions with logic such as IF the temperature is above a set value THEN turn the heater off, so the product responds to its inputs. These three uses combine to give functionality to products and processes: a vending machine counts coins, times dispensing and decides whether to release a drink.

    Your focus

    1. State that a microcontroller is programmed to control a product or process.
    2. Describe how a program counts input events and controls timing.
    3. Explain how a conditional instruction lets a product make a decision from its inputs.

    Systems approach to designing - Processes exam tips

    Marking Points
    • Identifies a microcontroller as a programmable chip that executes stored instructions to control a product or process.
    • Explains counting as incrementing a stored value on each input event, such as tallying people passing a sensor.
    • Explains timing as measuring or controlling elapsed time or intervals, such as switching an output off after a set delay.
    • Explains decision making as testing an input condition and choosing an output action, such as turning a heater off when a temperature threshold is reached.
    • Links the programmed behaviour to added functionality in a product or process rather than describing the chip's physical appearance.
    Examiner Tips
    • 💡Read the question stem for the named use (counter, timer or decision making) and answer that use specifically.
    • 💡Give a short product example, such as a pedestrian crossing timer, to show the function in context.
    • 💡Use precise terms such as input, process, output and condition when describing the program's action.
    Common Mistakes
    • Describes a microcontroller as a simple fixed component such as a resistor; recognise it as a programmable device running stored instructions.
    • Treats counting and timing as the same function; separate tallying input events from measuring or controlling elapsed time.
    • Omits the decision-making role and lists only inputs and outputs; include a condition test that selects an action.
    • Assumes programming is only for display; explain how the program delivers the product's behaviour and functionality.