Systems approach to designing - Inputs — AQA GCSE Design and Technology
Systems approach to designing - Inputs explained
Input devices detect a change and pass a signal into a system.
Read the full explanation
A light sensor, such as a light-dependent resistor, changes its resistance as light level changes, so it suits automatic lighting or a dusk switch. A temperature sensor, such as a thermistor, changes resistance with heat, so it suits a fan, heater or thermostat. A pressure sensor responds to force or compression, so it suits a seat-occupancy mat, a touch pad or a pressure pad alarm. A switch is operated by the user or by a mechanism and gives a simple on or off signal, such as a push-to-make button or a microswitch in a door. Match each device to the change it detects and the output it could control.
Your focus
- Identify light, temperature and pressure sensors and switches as input devices.
- Match each input device to the change it detects.
- Select a suitable input device for a given product or process.
Systems approach to designing - Inputs exam tips
Marking Points
- Names a light sensor as the input that responds to a change in light level and links it to a suitable output.
- Names a temperature sensor as the input that responds to a change in heat and links it to a suitable output.
- Names a pressure sensor as the input that responds to force or compression and links it to a suitable output.
- Names a switch as an input operated by a user or mechanism that gives an on or off signal.
Examiner Tips
- 💡For each device, state the change it detects and one product it could control.
- 💡Use the correct device name, such as light-dependent resistor or thermistor, where the question asks for a component.
- 💡Distinguish clearly between a varying sensor signal and a switch's on or off state.
Common Mistakes
- Confuses a sensor with an output such as a lamp or buzzer; state that a sensor detects a change and feeds the signal into the system.
- Treats a switch as a sensor that measures a level; explain that a switch gives a simple on or off signal rather than a varying reading.
- Matches a temperature sensor to a light-controlled product; check that the sensed change matches the product's job.