Skip to topic
    ← Back to course topics

    Systems approach to designing — AQA GCSE Design and Technology

    Systems approach to designing explained

    An electronic system takes an input, processes it and produces an output.

    Read the full explanation

    A programmable component such as a microcontroller stores a set of instructions, so the same circuit can behave differently depending on the code it runs. This lets a designer give a product functionality: a lamp that switches on when it gets dark, a fan that runs only above a set temperature, or a process that counts items on a line. Because the behaviour lives in the program, the designer can enhance and customise operation without rebuilding the circuit, for example changing a delay time, a threshold or a sequence of steps. Consider the input, the processing and the output, and state what the program changes.

    Your focus

    1. Identify the input, process and output stages of an electronic system.
    2. Explain how a programmable component provides functionality to a product or process.
    3. Describe how changing a program enhances or customises a product's operation.

    Systems approach to designing exam tips

    Marking Points
    • Identifies the input, process and output parts of an electronic system and states what each contributes.
    • Explains that a programmable component follows stored instructions so its behaviour can be changed by altering the program.
    • Describes how programming a component provides functionality, such as switching an output on at a chosen threshold.
    • Explains how reprogramming enhances or customises operation, for example by changing a delay, threshold or sequence without redesigning the circuit.
    Examiner Tips
    • 💡Read the question for the words input, process and output, then name a component for each.
    • 💡Link every programmable feature to a specific change in the product's behaviour rather than saying it is 'better'.
    • 💡Use a short example, such as a light that switches on below a set light level, to show how code customises operation.
    Common Mistakes
    • Treats a programmable component as a fixed circuit that cannot change behaviour; state that its instructions can be rewritten to alter the output.
    • Names an output as an input, such as calling a buzzer a sensor; check the direction of energy and signal through the system.
    • Assumes programming removes the need for input devices; explain that sensors and switches still supply the signal the program acts on.