Mechanical devices - Different types of movement — AQA GCSE Design and Technology
Mechanical devices - Different types of movement explained
Mechanical devices change one kind of motion into another, and each of the four movement types has a distinct path.
Read the full explanation
Linear motion travels in a straight line in one direction, such as a slider moving along a rail. Rotary motion turns about a fixed centre, such as a wheel or a shaft spinning continuously. Reciprocating motion moves back and forth along a straight line, such as a piston rising and falling in a cylinder. Oscillating motion swings back and forth about a pivot along an arc, such as a pendulum or a clock's balance arm. The key distinction to hold is that reciprocating is straight-line to-and-fro while oscillating is curved to-and-fro about a fixed point. A cam and follower, a crank and slider, or a rack and pinion each convert between these types, so identifying the input and output movement lets you choose the right mechanism.
Your focus
- State the path followed by each of the four movement types.
- Distinguish reciprocating motion from oscillating motion using the shape of the path.
- Match a named mechanical device to the movement it produces.
Mechanical devices - Different types of movement exam tips
Marking Points
- Identifies linear motion as movement in a straight line in a single direction, such as a slider on a rail.
- Identifies rotary motion as continuous turning about a fixed centre, such as a spinning shaft or wheel.
- Identifies reciprocating motion as straight-line back-and-forth movement, such as a piston in a cylinder.
- Identifies oscillating motion as swinging back and forth about a pivot along an arc, such as a pendulum.
- Distinguishes reciprocating from oscillating by stating that reciprocating follows a straight path while oscillating follows a curved path about a fixed point.
- Matches a named mechanism, such as a crank and slider or a cam and follower, to the movement it produces.
Examiner Tips
- 💡Learn one clear everyday example for each of the four movements so you can match a description quickly.
- 💡Read the question carefully to see whether it asks for the input or the output movement of the device.
- 💡When two options look similar, decide whether the path is straight or curved to separate reciprocating from oscillating.
Common Mistakes
- Confuses reciprocating with oscillating; remember that reciprocating is straight-line to-and-fro and oscillating swings along an arc about a pivot.
- Describes rotary motion as back-and-forth turning; keep rotary as continuous rotation about a fixed centre.
- Treats linear motion as any movement; restrict linear to a straight path in one direction.
- Assumes a mechanism produces only one movement type; check both the input and the output movement.