Skip to topic
    ← Back to course topics

    Scales of production — AQA GCSE Design and Technology

    Scales of production explained

    Production volume drives the choice of manufacturing method because each method trades set-up cost against cost per unit.

    Read the full explanation

    One-off production suits a single bespoke item such as a made-to-measure garment, where labour is skilled and unit cost is high but no tooling is wasted. Batch production makes a set quantity, for example 500 chairs, so a mould or jig is used repeatedly and unit cost falls while some flexibility remains. Mass production runs a standard product continuously on a line, spreading expensive tooling over huge numbers so unit cost is lowest, though flexibility is lost. Continuous production runs without stopping, as in paper or chemical manufacture. Learners should match volume to method and explain the cost and flexibility reasons.

    Your focus

    1. Match a given production volume to a suitable manufacturing method
    2. Explain how set-up cost and cost per unit change with volume
    3. Justify a method choice using cost and flexibility reasons

    Scales of production exam tips

    Marking Points
    • Identifies that one-off production suits a single bespoke item and keeps unit cost high because skilled labour is not spread over many units
    • Explains that batch production makes a set quantity using tooling repeatedly, lowering unit cost while retaining some flexibility
    • States that mass production spreads expensive tooling over very large volumes to give the lowest unit cost per item
    • Recognises that continuous production runs without stopping, as in paper or chemical manufacture, suiting very high volumes
    • Links the choice of method to the balance between set-up cost and cost per unit at a given volume
    Examiner Tips
    • 💡Name the scale of production first, then give the cost or flexibility reason that justifies it
    • 💡Use a concrete product example such as a bespoke garment for one-off or 500 chairs for batch to anchor the reason
    • 💡Compare set-up cost against cost per unit explicitly when explaining why volume changes the method
    Common Mistakes
    • Assumes mass production always gives the cheapest unit cost regardless of volume; check that tooling cost is spread over enough units to justify it
    • Treats batch and mass production as identical; distinguish a fixed batch quantity from continuous standardised output
    • Ignores set-up and tooling costs when comparing methods; include them because they explain why low volumes avoid expensive tooling