Skip to topic
    ← Back to course topics

    Using and working with materials - How to shape and form using cutting, abrasion and addition — AQA GCSE Design and Technology

    Using and working with materials - How to shape and form using cutting, abrasion and addition explained

    This row requires knowledge of seven metal processes.

    Read the full explanation

    Cutting separates metal with a hacksaw or tin snips. Drilling bores a hole with a drill, using a centre punch to mark the point. Turning rotates the workpiece on a lathe against a cutting tool to produce cylinders. Milling moves the workpiece past a rotating multi-tooth cutter to make slots and flat faces. Casting pours molten metal into a mould to form a shape. Brazing joins metals by melting a filler with a lower melting point than the parent metal. Welding fuses the parent metals together, often with a filler. Match each process to its purpose and equipment.

    Your focus

    1. Match each of the seven metal processes to its equipment and purpose.
    2. Distinguish turning from milling by the motion involved.
    3. Separate brazing from welding by how the joint is formed.

    Using and working with materials - How to shape and form using cutting, abrasion and addition exam tips

    Marking Points
    • Identifies cutting as separating metal with a hacksaw or tin snips.
    • Describes drilling as boring a hole with a drill after marking the point with a centre punch.
    • Explains turning as rotating the workpiece on a lathe against a cutting tool to produce cylindrical forms.
    • States that milling moves the workpiece past a rotating multi-tooth cutter to form slots and flat faces.
    • Recognises casting as pouring molten metal into a mould to form a shape.
    • Distinguishes brazing, which melts a filler of lower melting point, from welding, which fuses the parent metals.
    Examiner Tips
    • 💡Group the seven processes into separating, forming and joining to narrow the options.
    • 💡Check whether the question asks about the machine, the motion or the joint type.
    • 💡Eliminate options that confuse a forming process with a joining process.
    Common Mistakes
    • Treats brazing and welding as identical; keep brazing as a lower-melting-point filler joint and welding as fusion of the parent metals.
    • Names a lathe for making slots; use milling for slots and flat faces and turning for cylindrical forms.
    • Describes casting as a joining process; treat casting as forming molten metal in a mould.