Specialist techniques and processes - The use of production aids — AQA GCSE Design and Technology
Specialist techniques and processes - The use of production aids explained
Production aids help a designer-maker repeat work accurately and quickly.
Read the full explanation
Measurement and reference points are fixed features, such as a datum edge or a marked centre line, from which all other sizes are taken, so every part is measured from the same place. A template is a shaped guide, often thin plywood or card, that is drawn around or used to mark hole positions. A pattern is a full-size outline of a component, commonly used in textiles, that is pinned to material and cut around, including seam allowance. A jig holds the workpiece and guides the tool, for example a drilling jig with hardened bushings that positions a drill at a set distance from an edge. Choose the aid that suits the batch size, the material and the accuracy needed: a one-off job may need only a datum line, while repeated identical parts justify a jig.
Your focus
- Distinguish between measurement reference points, templates, jigs and patterns.
- Explain how each production aid improves accuracy or speed of repeated work.
- Select a suitable production aid for a given material and batch size.
Specialist techniques and processes - The use of production aids exam tips
Marking Points
- Identifies a datum or reference point as a fixed feature from which other measurements are taken so parts stay consistent.
- Describes a template as a shaped guide used to mark or cut identical outlines or hole positions.
- Explains a pattern as a full-size outline of a component, typically in textiles, that is laid on material and cut around.
- Describes a jig as a device that holds the workpiece and guides the tool to a set position for repeatable accuracy.
- Selects the aid that suits the material, the number of identical parts and the accuracy required.
Examiner Tips
- 💡Name the aid and then state its job in one sentence, for example what it holds, guides or marks.
- 💡Link the choice of aid to the number of identical parts and the accuracy needed.
- 💡Use the correct term for the material, such as pattern for textiles and jig for drilling or machining.
- 💡Check that any measurement you quote is taken from a stated reference point.
Common Mistakes
- Confuses a jig with a template; remember that a jig holds the work and guides the tool, while a template only marks a shape.
- Treats a pattern as any drawing of a product; keep the meaning of a full-size cutting outline used to transfer a shape onto material.
- Measures each feature from a different edge; take all sizes from one stated datum or reference point.
- Assumes every task needs a jig; match the aid to batch size, material and required accuracy.