Specialist techniques and processes - Tools, equipment and processes — AQA GCSE Design and Technology
Specialist techniques and processes - Tools, equipment and processes explained
Turning is a machining process in which a workpiece is clamped and rotated while a fixed cutting tool removes material to produce a cylindrical or tapered shape.
Read the full explanation
A wood lathe turns timber between centres or on a faceplate, and a metal lathe holds the work in a chuck while the tool is fed along or into the rotating piece. The turner selects the tool, sets the speed and feeds the cutter to create diameters, shoulders, grooves and tapers. Safety matters: the work must be securely held, the tool rest set close to the work, and loose clothing kept clear. Learners should name the machine, describe the rotating-work principle and explain what the cutting tool does.
Your focus
- Describe the principle of turning with a rotating workpiece
- Name a lathe and a method of holding the work
- Explain how the cutting tool shapes the rotating material
Specialist techniques and processes - Tools, equipment and processes exam tips
Marking Points
- Defines turning as a process where the workpiece rotates while a cutting tool removes material
- Names a suitable machine such as a wood lathe or a metal lathe
- Explains that the result is a cylindrical or tapered form produced by feeding the tool along the work
- States that the workpiece must be held securely in a chuck, between centres or on a faceplate
- Recognises that tool selection and speed affect the finish and accuracy of the turned shape
Examiner Tips
- 💡State clearly which part rotates and which part cuts to show understanding of the principle
- 💡Give a named machine and a named workholding method for a complete answer
- 💡Link turning to the shape produced, such as a cylinder, taper or groove, rather than a flat surface
Common Mistakes
- Reverses the roles and says the tool rotates; the workpiece turns and the tool stays fixed
- Treats turning as the same as drilling; drilling feeds a rotating bit into a stationary or held work
- Overlooks workholding; specify a chuck, centres or faceplate so the piece is secure before cutting