← Back to Edexcel GCSE Design and Technology

    Exam-style questions by topic — Edexcel GCSE Design and Technology

    One question for each of 64 topics. These are written for this specification by MasteryMind. They are not past-paper questions, and they are not from Pearson Edexcel.

    1. The impact of new and emerging technologies

      A manufacturer moves production overseas and now ships finished products thousands of kilometres by road, sea and rail. Which environmental impact is most directly increased by this global transport of goods?

      Practise The impact of new and emerging technologies
    2. The categorisation of the types, properties and structure of thermoforming and thermosetting polymers

      A thermosetting polymer foam is used to line a hot-drinks cup. Explain, in terms of its structure, why the foam reduces heat loss from the drink better than a solid block of the same polymer.

      Practise The categorisation of the types, properties and structure of thermoforming and thermosetting polymers
    3. The categorisation of the types, properties and structure of natural, synthetic, blended and mixed fibres, and woven, non-woven and knitted textiles

      A student compares a warp-knitted fabric with a weft-knitted fabric. Which statement best explains why the warp-knitted fabric is less likely to ladder when a yarn breaks?

      Practise The categorisation of the types, properties and structure of natural, synthetic, blended and mixed fibres, and woven, non-woven and knitted textiles
    4. The categorisation of the types, properties and structure of natural and manufactured timbers

      A hardwood such as beech is used for a kitchen chopping board. Which property of the hardwood makes it suitable for this use?

      Practise The categorisation of the types, properties and structure of natural and manufactured timbers
    5. All design and technological practice takes place within contexts which inform outcomes

      A material is described as being able to be drawn into thin wires without breaking. Which property does this describe?

      Practise All design and technological practice takes place within contexts which inform outcomes
    6. Investigate environmental, social and economic challenges when identifying opportunities and constraints that influence the processes of designing and making

      A workshop disposes of 150 kg of offcuts a month. Recycling the offcuts costs £0.40 per kg, while sending them to landfill costs £1.10 per kg. How much money does the workshop save each month by recycling rather than sending the offcuts to landfill?

      Practise Investigate environmental, social and economic challenges when identifying opportunities and constraints that influence the processes of designing and making
    7. Investigate and analyse the work of past and present professionals and companies in order to inform design

      A design studio is briefed by a hotel owner who pays for a new luggage trolley, while the guests will be the people wheeling it. Which description correctly identifies the client and the user?

      Practise Investigate and analyse the work of past and present professionals and companies in order to inform design
    8. Use different design strategies to generate initial ideas and avoid design fixation

      A designer is using a user-centred design approach to develop a new kitchen kettle. Which activity best fits this approach?

      Practise Use different design strategies to generate initial ideas and avoid design fixation
    9. Develop, communicate, record and justify design ideas, applying suitable techniques

      A design team must send an accurate technical drawing of a bracket to a manufacturer in another country, and the drawing must be easy to edit later. Which approach best meets both requirements?

      Practise Develop, communicate, record and justify design ideas, applying suitable techniques
    10. How the critical evaluation of new and emerging technologies informs design decisions; considering contemporary and potential future scenarios from different perspectives, such as ethics and the environment

      A factory makes 2000 components. Each component needs 0.5 kWh of energy to manufacture, and electricity costs £0.20 per kWh. What is the total electricity cost for manufacturing the components?

      Practise How the critical evaluation of new and emerging technologies informs design decisions; considering contemporary and potential future scenarios from different perspectives, such as ethics and the environment
    11. How energy is generated and stored in order to choose and use appropriate sources to make products and power systems

      A power station burns coal to heat water into steam that drives turbines. Which statement best explains why coal is classed as a fossil fuel?

      Practise How energy is generated and stored in order to choose and use appropriate sources to make products and power systems
    12. Developments in modern and smart materials, composite materials and technical textiles

      A towel manufacturer wants a bath towel that dries the skin quickly after washing. Which property of the towel fabric is most useful for this job?

      Practise Developments in modern and smart materials, composite materials and technical textiles
    13. The functions of mechanical devices used to produce different sorts of movements, including the changing of magnitude and the direction of forces

      A windscreen wiper blade sweeps across the glass through an arc and then sweeps back again about its pivot. Which type of movement does the blade have?

      Practise The functions of mechanical devices used to produce different sorts of movements, including the changing of magnitude and the direction of forces
    14. How electronic systems provide functionality to products and processes, including sensors and control devices to respond to a variety of inputs, and devices to produce a range of outputs

      An LDR is used in a circuit that switches on a lamp at night. What happens to the LDR's resistance as evening falls and the light fades?

      Practise How electronic systems provide functionality to products and processes, including sensors and control devices to respond to a variety of inputs, and devices to produce a range of outputs
    15. The use of programmable components to embed functionality into products in order to enhance and customise their operation

      A programmable blind uses a light sensor as input and a motor as output. The program switches the motor on to close the blind when the light level is above 500, and switches the motor off when the level is 500 or below. On a cloudy day the level falls from 600 to 450. What does the system do to the motor?

      Practise The use of programmable components to embed functionality into products in order to enhance and customise their operation
    16. The categorisation of the types, properties and structure of ferrous and non-ferrous metals

      Which of these metals is classed as a ferrous metal?

      Practise The categorisation of the types, properties and structure of ferrous and non-ferrous metals
    17. The categorisation of the types, properties and structure of papers and boards

      A student must choose one paper for a final design presentation that will be coloured with watercolour washes and also carry fine ink line work. Explain why cartridge paper is a suitable choice for both requirements.

      Practise The categorisation of the types, properties and structure of papers and boards
    18. The sources, origins, physical and working properties of ferrous and non-ferrous metals and their social and ecological footprint

      A company mines iron ore from a large open pit. Which change to the surrounding landscape is a direct result of this extraction?

      Practise The sources, origins, physical and working properties of ferrous and non-ferrous metals and their social and ecological footprint
    19. Development of design ideas into a chosen design

      A design uses 6 identical brackets, and each bracket needs 4 screws. How many screws must be ordered in total for the 6 brackets?

      Practise Development of design ideas into a chosen design
    20. The way in which the selection of ferrous and non-ferrous metals is influenced

      A school workshop stocks mild steel sheet in 1 mm, 2 mm and 3 mm thicknesses. A pupil needs a 2 mm guard. What is the main advantage of choosing from this stock?

      Practise The way in which the selection of ferrous and non-ferrous metals is influenced
    21. Communication of design ideas

      A designer wants to show a product idea quickly with notes pointing to key features such as materials and dimensions. Which technique best suits this purpose?

      Practise Communication of design ideas
    22. The impact of forces and stresses on ferrous and non-ferrous metals and how they can be reinforced and stiffened

      A thin steel shelf in a workshop bends too much when heavy tools are placed on it. Which change would make the shelf resist bending without adding a second support?

      Practise The impact of forces and stresses on ferrous and non-ferrous metals and how they can be reinforced and stiffened
    23. Stock forms, types and sizes in order to calculate and determine the quantity of ferrous and non-ferrous metals required

      A square metal bar has a side of 12 mm. What is the cross-sectional area of the bar?

      Practise Stock forms, types and sizes in order to calculate and determine the quantity of ferrous and non-ferrous metals required
    24. Alternative processes that can be used to manufacture ferrous and non-ferrous metal products to different scales of production

      A batch of 400 aluminium rivets is produced. A quality controller inspects a sample of 50 rivets and finds 4 that are outside the specified diameter. Using this sample, how many faulty rivets would be expected in the whole batch?

      Practise Alternative processes that can be used to manufacture ferrous and non-ferrous metal products to different scales of production
    25. Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality ferrous and/or non-ferrous metal prototype

      A student needs to fold a 90° bend in a 1 mm aluminium sheet along a straight line. Which method gives the neatest, most accurate bend?

      Practise Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality ferrous and/or non-ferrous metal prototype
    26. Appropriate surface treatments and finishes that can be applied to ferrous and non-ferrous metals for functional and aesthetic purposes

      A manufacturer wants an even polymer finish on a batch of small steel brackets with recessed areas. Why is dip coating well suited to this task?

      Practise Appropriate surface treatments and finishes that can be applied to ferrous and non-ferrous metals for functional and aesthetic purposes
    27. Manufacture

      A workshop needs to drill twenty identical holes in the same position on each of fifty plastic enclosures. Which aid is most appropriate to keep the holes consistent and speed up the process?

      Practise Manufacture
    28. Quality and accuracy

      A designer builds a prototype of a phone stand and tests it by placing five different phones on it in turn. What is the designer measuring by doing this?

      Practise Quality and accuracy
    29. The sources, origins, physical and working properties of papers and boards and their social and ecological footprint

      Which raw material is the main source of the metal used to make aluminium foil?

      Practise The sources, origins, physical and working properties of papers and boards and their social and ecological footprint
    30. The way in which the selection of papers and boards is influenced

      A packaging firm spends £15,000 on printing plates and set-up for a carton run. Each carton then costs £0.40 in paper and ink. When 50,000 cartons are made, what is the fixed set-up cost carried by each carton?

      Practise The way in which the selection of papers and boards is influenced
    31. The impact of forces and stresses on papers and boards and how they can be reinforced and stiffened

      A crisp packet uses a laminate of metallised film and plastic. Which property does the metallised layer mainly add to the packaging?

      Practise The impact of forces and stresses on papers and boards and how they can be reinforced and stiffened
    32. Stock forms, types and sizes in order to calculate and determine the quantity of papers and boards required

      Which statement correctly describes how the A series of paper sizes is organised?

      Practise Stock forms, types and sizes in order to calculate and determine the quantity of papers and boards required
    33. Alternative processes that can be used to manufacture paper and board products to different scales of production

      A greetings card company sends a digital design file to a machine that cuts and creases each card automatically from a stack of card. Which term describes this method of manufacture?

      Practise Alternative processes that can be used to manufacture paper and board products to different scales of production
    34. Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality paper and board prototype

      A pupil must mark out four identical circular windows of 30 mm diameter on a card panel. Which marking-out approach gives the most consistent results?

      Practise Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality paper and board prototype
    35. Appropriate surface treatments and finishes that can be applied to papers and boards for functional and aesthetic purposes

      A designer wants a leaflet where one logo stands out with a raised, glossy patch while the rest of the sheet stays matt and easy to write on. Which UV varnish approach best achieves this?

      Practise Appropriate surface treatments and finishes that can be applied to papers and boards for functional and aesthetic purposes
    36. The sources, origins, physical and working properties of thermoforming and thermosetting polymers and their social and ecological footprint

      A brand wants to reduce the social footprint of a polymer sports bottle made overseas. Which strategy addresses the social footprint most directly?

      Practise The sources, origins, physical and working properties of thermoforming and thermosetting polymers and their social and ecological footprint
    37. The way in which the selection of thermoforming and thermosetting polymers is influenced

      A manufacturer is choosing a polymer for a school lunchbox to be exported to countries with strict religious rules about food imagery. The lunchbox must be tough and keep its shape in a hot car. Which selection best balances avoiding offence with these technical demands?

      Practise The way in which the selection of thermoforming and thermosetting polymers is influenced
    38. The impact of forces and stresses on thermoforming and thermosetting polymers and how they can be reinforced and stiffened

      A polymer shelving frame is built as a series of rectangles. When a sideways force is applied, the frame leans over. What is this distortion of a rectangular frame called?

      Practise The impact of forces and stresses on thermoforming and thermosetting polymers and how they can be reinforced and stiffened
    39. Stock forms, types and sizes in order to calculate and determine the quantity of thermoforming and thermosetting polymers required

      A batch of 30 identical polymer trays is needed. Each tray requires a blank measuring 250 mm by 160 mm cut from high-impact polystyrene sheet. What total area of sheet, in square metres, must be ordered for the blanks alone?

      Practise Stock forms, types and sizes in order to calculate and determine the quantity of thermoforming and thermosetting polymers required
    40. Alternative processes that can be used to manufacture thermoforming and thermosetting polymers products to different scales of production

      After a blow-moulded bottle has been inflated against the mould walls, why is cooled water passed through channels in the mould?

      Practise Alternative processes that can be used to manufacture thermoforming and thermosetting polymers products to different scales of production
    41. Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality thermoforming and thermosetting polymers prototype

      What is placed under the softened polymer sheet in a vacuum former to give the sheet its shape?

      Practise Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality thermoforming and thermosetting polymers prototype
    42. Appropriate surface treatments and finishes that can be applied to thermoforming and thermosetting polymers for functional and aesthetic purposes

      A manufacturer wants to add a coloured, protective coating to the outside of a thermoforming polymer casing. Which finishing method is most suitable for applying this coating?

      Practise Appropriate surface treatments and finishes that can be applied to thermoforming and thermosetting polymers for functional and aesthetic purposes
    43. The sources, origins, physical and working properties of components and systems and their social and ecological footprint

      A resistor has a stated value of 220 Ω with a silver tolerance band. What range of resistance should a technician expect the component to fall within?

      Practise The sources, origins, physical and working properties of components and systems and their social and ecological footprint
    44. The way in which the selection of components and systems is influenced

      A company makes rechargeable power tools. To comply with the WEEE Directive, which action should the company take for products returned at end of life?

      Practise The way in which the selection of components and systems is influenced
    45. The impact of forces and stresses on objects and how they can be reinforced and stiffened

      A designer is adding ribs to a moulded plastic case. Explain why a few deep ribs are usually more effective than many shallow ribs of the same total material.

      Practise The impact of forces and stresses on objects and how they can be reinforced and stiffened
    46. Stock forms, types and sizes in order to calculate and determine the quantity of components required

      A circuit contains three resistors connected in series with resistance values of 5 Ω, 10 Ω and 15 Ω. What is the total resistance of this series combination?

      Practise Stock forms, types and sizes in order to calculate and determine the quantity of components required
    47. Alternative processes that can be used to manufacture components and systems to different scales of production

      A company makes a large number of identical plastic casings using an injection moulding machine that runs the same mould repeatedly. Why is this an example of mass production rather than batch production?

      Practise Alternative processes that can be used to manufacture components and systems to different scales of production
    48. Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality systems prototype

      Which term describes a component that is soldered directly onto a metal pad on the surface of a circuit board, with no lead passing through the board?

      Practise Specialist techniques, tools, equipment and processes that can be used to shape, fabricate, construct and assemble a high-quality systems prototype
    49. Appropriate surface treatments and finishes that can be applied to components and systems for functional and aesthetic purposes

      A workshop produces 400 identical plastic casing panels and needs a durable, even colour coating applied quickly to every panel with minimal paint waste. Which finishing method best meets these requirements?

      Practise Appropriate surface treatments and finishes that can be applied to components and systems for functional and aesthetic purposes
    50. The sources, origins, physical and working properties of natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles and their social and ecological footprint

      A designer is choosing how to dispose of offcuts from a cotton garment factory. Which disposal choice best reflects ethical responsibility for the environment?

      Practise The sources, origins, physical and working properties of natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles and their social and ecological footprint
    51. The way in which the selection of natural, synthetic, blended and mixed-fibre textiles is influenced by

      A theatre costume designer wants a fabric that looks rich and reflective under stage lighting for a royal character. Which fibre property best supports this design intention?

      Practise The way in which the selection of natural, synthetic, blended and mixed-fibre textiles is influenced by
    52. The impact of forces and stresses on natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles and how they can be reinforced and stiffened

      A tent pole pushes down on the fabric of a tent, squeezing the material where they meet. Which type of force is acting on the fabric at that point?

      Practise The impact of forces and stresses on natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles and how they can be reinforced and stiffened
    53. Typical stock forms, types and sizes used in order to calculate and determine the required quantity of natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles

      A double-weight knit has a mass of 400 g per square metre. A maker needs 1.5 m². What mass of fabric is required?

      Practise Typical stock forms, types and sizes used in order to calculate and determine the required quantity of natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles
    54. Alternative processes that can be used to manufacture typical products of natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles to different scales of production

      A factory making blended-fibre socks uses a control chart. The last five readings all lie above the upper action limit. What is the most appropriate quality control response?

      Practise Alternative processes that can be used to manufacture typical products of natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles to different scales of production
    55. Specialist techniques, tools, equipment and processes that can be used on natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles to shape, fabricate, construct and assemble a high-quality prototype

      A student is making a tote bag from a heavy woven canvas and wants a strong, hard-wearing finish along the top opening that will not fray with use. Which raw-edge finish is most suitable for this heavy fabric?

      Practise Specialist techniques, tools, equipment and processes that can be used on natural, synthetic, woven and non-woven, knitted, blended and mixed-fibre textiles to shape, fabricate, construct and assemble a high-quality prototype
    56. Appropriate surface treatments and finishes that can be applied to natural, synthetic, woven and non-woven, knitted, blended and mixed fibre textiles for functional and aesthetic purposes

      A factory produces a nylon jacket fabric that must resist shrinking in a hot wash and also have a smooth, slightly shiny outer face. Which combination of physical finishes meets both requirements?

      Practise Appropriate surface treatments and finishes that can be applied to natural, synthetic, woven and non-woven, knitted, blended and mixed fibre textiles for functional and aesthetic purposes
    57. The sources, origins, physical and working properties of each natural and manufactured timber and their social and ecological footprint

      Two timber samples of equal volume are weighed. Sample X has a mass of 600 g and Sample Y has a mass of 450 g. Which conclusion about their physical characteristics is correct?

      Practise The sources, origins, physical and working properties of each natural and manufactured timber and their social and ecological footprint
    58. The way in which the selection of each natural and manufactured timber is influenced

      A company claims its new timber product is environmentally friendly because the timber is biodegradable. Evaluate whether biodegradability alone is a sound basis for this environmental claim.

      Practise The way in which the selection of each natural and manufactured timber is influenced
    59. The impact of forces and stresses on each natural and manufactured timber and how they can be reinforced and stiffened

      A timber beam is stiffened by gluing a strip of carbon fibre along its length so the two materials act as one. What name is given to a material made from two or more different materials combined to give improved properties?

      Practise The impact of forces and stresses on each natural and manufactured timber and how they can be reinforced and stiffened
    60. Typical stock forms, types and sizes used in order to calculate and determine the required quantity of each natural and manufactured timber

      A rectangular timber rail has a cross-section of 45 mm by 30 mm. What is the cross-sectional area of the rail?

      Practise Typical stock forms, types and sizes used in order to calculate and determine the required quantity of each natural and manufactured timber
    61. Alternative processes that can be used to manufacture typical products of each natural and manufactured timber to different scales of production

      A factory must choose between hand-finishing each of 5,000 identical timber units or using a spray line that finishes many units in one pass. Analyse the main reason the spray line better supports quantity production.

      Practise Alternative processes that can be used to manufacture typical products of each natural and manufactured timber to different scales of production
    62. Specialist techniques, tools, equipment and processes that can be used on each natural and manufactured timber to shape, fabricate, construct and assemble a high-quality prototype

      A workshop produces a wooden prototype using CAD to design it and CAM to manufacture it. Which pair correctly matches each stage to what it does?

      Practise Specialist techniques, tools, equipment and processes that can be used on each natural and manufactured timber to shape, fabricate, construct and assemble a high-quality prototype
    63. Component 2 - Overview

      During a project a student keeps testing a model, judging the result and improving the idea. Which term describes this repeated approach?

      Practise Component 2 - Overview
    64. Qualification aims and objectives

      A technician is cutting a sheet of medium density fibreboard on a bench saw and notices the offcut is drifting towards the spinning blade. Which response best reflects safe working practice?

      Practise Qualification aims and objectives

    Practise all 3,085 practice questions and see your weak topics.

    Start free

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge